Metal Liner High Chrome Slurry Pump For Heavy Duty With Discharge Suction 6 Inch

Metal Liner High Chrome Slurry Pump For Heavy Duty With Discharge Suction 6 Inch

Main introduction of slurry pump

1. The primary applications for the 6/4D- metal slurry pumps are mill discharge, crusher slurry, sand

and aggregate or any coarse solids or other severe, abrasive slurries especially in the copper, gold,

iron ore, lead-zinc, coal or phosphate plants.

2. The most dramatic savings will be in these applications, though savings will also be realized on find

solids, like fine sand recovery or kaolin. The key advantage of the SH metal slurry pumps is the 10%

to 30% lower power, long even wear life and less pump downtime, which results in lowe cost-per-ton

pumped, along with better cyclone separation.

Model meaning

6/4D-

6-------Suction diameter

4-------Discharge diameter

D-------Frame type

------ Slurry pump type

Typical Applications:

Ash Handling

Cyclone Feeds

Pulp and Paper

Abrasive Slurries

Coal Preparation

Mineral Processing

Aggregate Processing

slurry pump 6/4D- flow control:

During the operation of the slurry pump, attention should be paid to the temperature and leakage of the

packing gland. Normal packing leakage should not exceed 10-20 drops per minute.
In the pump operation, if the slurry pump can take in air and it can be solid, it will make an abnormal

sound and vibrate accordingly.
In the pump operation, if the backup valve of the backup machine leaks and the switching valve is always

open, it should be noted that the backup machine is reversed due to the reverse flow.
When the pump regulates the flow during normal operation, it is not possible to reduce the flow rate by

reducing the opening of the pump suction line valve. Otherwise, the pump inlet flow will be insufficient and

the pump will cavitation.
In the pump operation, for the bearings that need cooling water, pay attention to the temperature and

quantity of water, and try to keep the bearing temperature within the specified range.

Performance table

Construction Design