Shijiazhuang Shiza Pump Industry Co.,Ltd.
Quality First, Reputation First, Honesty, Customer First.
Add to Cart
Product Introduction
65QVL - SP Lengthen Submerged Sump Pump is a single-stage, single-suction cantilever structure, suitable for conveying abrasive, coarse particles and high concentration slurry. Pumps generally invade the pool or work inside the pit. It does not require any shaft seals and shaft seals to work properly under inhaled conditions. The SP type flow element and shaft are made of metal and are suitable for conveying abrasive slurry. The SP(R) type submerged pump is widely used in metallurgy, mining, coal, electric power, building materials and other departments.
The 65QVL - SP Lengthen Submerged Sump Pump model contains the "L" letter for the extended shaft series of submerged Sump Pump, which is suitable for deeper working conditions. This pump adds a guide bearing structure and operation on a standard basis. More stable and more widely applicable. However, flushing water is required at the guide bearing.
Type meaning
65 QVL - SP (R)
65---------------Discharge Diameter (mm)
QV---------------Support Type
L-----------------Extension type
SP---------------Sump pump
R-----------------Rubber lined
Specifications
| Allowable Max.Power | 30kw |
| Capacity | 23.4-111m³/h |
| Head | 5-29.5m |
| Speed | 700-1500r/min |
| Max.Eff. | 50% |
| Impeller Dia. | 280mm |
Usage
Submerged and vertical slurry pumps are mainly applicable to transport abrasive, coarse particle, high concentration slurry. They are widely used in metallurgy, mining, coal, electric power, building materials, environmental protection and other departments.
| Inspection and Detection: | |
| With various inspection and detection instruments ,like three-coordinate measuring instrument ,metallographic microscope, direct reading spectrometer ,Brinell hardness meter ,Vickers hardness meter, carbon and sulfur analyzer and other detection equipment,we can carry on the chemical composition analysis ,physical properties test ,coordinate measurement for various steel&steel materials | |
| Complete pump set inspection: | |
| We have performance testing platform for each batch pump inspection before delivery | |
| Quality control system for each set pump: | |
| Purchasing | 1. Strict rules and procedures to choose the raw material supplier |
| 2. Each batch raw material will be tested by quality control department | |
| Casting | 1 .Melting:Chemical element analysis for raw material before and after stove . |
| 2. Moulding :Strict sand moulding qualified before iron liquid pouring for casting | |
| 3. Cleaning semi-finished parts sand :Strict inspection on the appearance and size qualified before storage. | |
| Machining | 1.Self -inspection and inspection between different steps. |
| 2.First part inspection | |
| 3.Procedures inspection | |
| 4..Inspection before storage the mining AH slurry pumps | |
| Assembling | 1.Inspector tracks the whole process of assembly of slurry pumps |
| 2.Slurry Pump pressure inspection and fillout the testing table | |
| 3.Painting inspection | |
| 4.Performance testing and fillout the testing table | |
| 5.Packing inspection of slurry pump | |
| 6.Issue quality certificate | |
Performance Chart
| Model | Allowable Max. Power (KW) | Clear Water Perofrmance | ||||
| Capacity m³/h | Head m | Speed r/min | Max.Eff % | Impeller Dia. mm | ||
| 40PV-SP | 15 | 19.44-43.2 | 4.5-28.5 | 1000-2200 | 40 | 188 |
| 40PV-SPR | 17.28-39.6 | 4-26 | 1000-2200 | 40 | 188 | |
| 65QV-SP | 30 | 23.4-111 | 5-29.5 | 700-1500 | 50 | 280 |
| 65QV-SPR | 22.5-105 | 5.5-30.5 | 700-1500 | 51 | 280 | |
| 100RV-SP | 75 | 54-289 | 5-35 | 500-1200 | 56 | 370 |
| 100RV-SPR | 64.8-285 | 7.5-36 | 600-1200 | 62 | 370 | |
| 150SV-SP | 110 | 108-479.16 | 8.5-40 | 500-1000 | 52 | 450 |
| 200SV-SP | 110 | 189-891 | 6.5-37 | 400-850 | 64 | 520 |
| 250SV-SP | 200 | 261-1089 | 7.5-33.5 | 400-750 | 60 | 575 |
| 300TV-SP | 200 | 288-1267 | 6.5-33 | 350-700 | 50 | 610 |
Construction Drawing
